In industrial automation, the gap between data acquisition and real-time decision-making is critical. Traditional I/O modules focus on the former; IOy delivers both. Below, we break down how IOy redefines the concept of I/O at the edge.
| IOy | Traditional I/O Module | |
|---|---|---|
| Logic Capability | Built-in lightweight logic engine, supports Boolean and arithmetic operations | No logic capability — only transmits signals |
| Control Mode | Local decision-making, real-time response | Requires PLC or controller for logic processing |
| Operation Example | When an input changes, IOy can trigger outputs or push data via MQTT instantly | Only sends data to PLC and waits for instructions |
🔹 IOy Advantage: Smarter, faster, autonomous edge control — no PLC dependency for simple logic.
| IOy | Traditional I/O Module | |
|---|---|---|
| Setup Method | Web configuration, graphical logic blocks, no programming required | Parameter-based setup only, limited function |
| Remote Adjustment | Supported via BLRAT platform | Often requires VPN or on-site changes |
| User Skill Level | Basic technical staff after short training | Professional PLC programmers needed |
🔹 IOy Advantage: Configure in minutes, not hours — minimal training, no software installation.
| IOy | Traditional I/O Module | |
|---|---|---|
| Scalability | Supports 1–3 Y-series boards, up to 24 I/O points | Usually fixed I/O count, limited expansion |
| Customization | Mix and match analog, digital, or relay boards | Often limited to predefined types |
🔹 IOy Advantage: One platform for multiple applications — tailor your I/O freely.
| IOy | Traditional I/O Module | |
|---|---|---|
| Protocol Support | Modbus TCP/RTU, MQTT, OPC UA (built-in) | Typically Modbus only |
| Network Design | Dual Ethernet ports, supports daisy-chain topology | Usually single port, requires external switch |
🔹 IOy Advantage: Connect freely across systems — one device, many standards.
| IOy | Traditional I/O Module | |
|---|---|---|
| Remote Maintenance | Built-in BLRAT remote tool for diagnostics & updates | Requires external SCADA/VPN systems |
| Response Speed | Instant troubleshooting via web access | Slow — on-site visits needed |
🔹 IOy Advantage: Remote visibility, faster recovery, reduced downtime.
| IOy | Traditional I/O Module |
|---|---|
| Distributed edge stations, smart equipment upgrades, cost-sensitive control systems | Pure data acquisition, PLC remote I/O extensions |
🔹 IOy Advantage: Ideal for next-generation automation where flexibility, cost-efficiency, and intelligence matter most.
Traditional I/O modules were built for data collection. IOy is built for decision-making at the edge.
By integrating logic control, protocol flexibility, and remote management, IOy transforms I/O from a passive signal collector into an active edge controller.
IOy = Smart I/O ++Gateway+ Edge Control + Remote Intelligence.
It’s not just an I/O module — it’s your next step toward smarter, decentralized automation.
